Vector VEC031POB Owner's Manual download pdf (Page 8)

8.Insert a 40 Amp fuse in the fuse holder.

9.Test the inverter by turning it on and plugging in a 100 watt lamp

or equipment.

10.If the inverter is not properly operating, then refer to the trouble-

shooting sections of this manual.

CAUTION: Loose connectors may cause overheated wires and melted

insulation. Check to make sure you have not reversed the polarity.

Damage due to reversed polarity is not covered by our warranty.

3.3 CONNECTION TO LOAD

The Power-On-Board™ 400 is equipped with dual standard North Ameri-

can AC power receptacles. Plug the cord from the equipment you wish

to operate into the AC receptacle(s). The green LED indicator will light to

indicate that the unit is functioning. Make sure the combined load re-

quirement of your equipment does not exceed 400 watts.

The Power-On-Board™ 400 is engineered to be connected directly to

standard electrical and electronic equipment in the manner described

above. Do not connect the Power Inverter to household or RV AC

distribution wiring. Do not connect the Power Inverter to any AC load

circuit in which the neutral conductor is connected to ground (earth) or

to the negative of the DC (battery) source.

WARNING: DO NOT connect to AC distribution wiring

CAUTION: RECHARGEABLE APPLIANCES

Certain rechargeable devices are designed to be recharged by

plugging them directly into an AC receptacle. These devices may

damage the inverter. Do not use the inverter to recharge items that

can be plugged directly into an AC receptacle.

This problem does not occur with the majority of battery-operated

equipment. Most of these devices use a separate charger or transformer

that is plugged into an AC receptacle. The Power-On-Board™ 400 is

easily capable of running most chargers and transformers.

3.4 FUSE REPLACEMENT

If the inverter is overloaded and the spade type fuses are blown, flip up

the fuse replacement covers on the back of the Power-On-Board™ 400

and replace the blown fuses with new spade type, 25 Amp fuses.

Determine the cause of the short before restarting the inverter.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Vector VEC031POB Owner's Manual Page 8