Vector PC-Duo Technical Information download pdf (Page 109)

109

Command Line Configuration

The following combination of the Host and Windows tools can be used to customize and

automatically deploy the Host to one or more target machines in your network:

 Use the command line utility PHSETUP to set the Host configuration options from a

command line. See "Configure Host from the command line."

 In addition to specifying options in the Host Control Panel window, use PHSETUP to

lock down other the Host features. See “Lock-down settings”.

 Use the Windows MSIEXEC installation command line utility to install a customized the

Host configuration. This feature is useful if you want to push the Host with the same set

of configuration options to a large number of target machines automatically. See “Install

Host with the MSIEXEC command line”.

 Use a login script to run commands at login time and then use this script to configure

an installed Host with PHSETUP, or install the Host using MSIEXEC.

NOTE: The Deployment Tool can also be used to mass deploy the Host configurations.

For more information, see the Deployment Tool Administration Guide.

No matter which method you choose to install the Host, the configuration settings can be

modified later using either PHSETUP from the command line, or directly from the Host

Control Panel window.

NOTE: For the Host to be available and the installation to be completed, you must reboot

the computer after initial installation.

NOTE: To configure a copy of the Host that is already installed on a Host computer, you

must have the administrative rights to configure the product on the Host computer. On

Windows Vista and Server 2008 platforms, you may have to run PHSETUP in an already-

elevated command prompt (which you may not be able to do from a login script). See

“Security tab”.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 146 147

No comments

Vector PC-Duo Technical Information Page 109