PC-Duo Host Guide
134
PHSETUP screen parameters
The following PHSETUP parameter corresponds to the "Screen tab" settings in the Host.
By default, this setting is set to no on
Windows XP, Windows 2003 Server
and older platforms so that kernel-
mode screen capture is used. Set this
setting to yes to use user-mode
screen capture on host platforms. By
default, this setting is set to yes on
Windows Vista, Windows Server 2008
and later platforms.
selectusermodeprofile
:
”profilename”
Select default user mode profile for
user mode screen capture
preferences. Current options are:
High Quality/High Bandwidth
Medium
Medium-Low (recording)
Low (recording)
[Custom]
setusermodeprofile:
”profilename,
imagetype,
imagequality,
fggrequency,
/jointfilesconvert/326691/bgfrequency,
capturefrequency,
bandwidthlimit”
Specify bandwidth throttling options
when creating a [Custom] user mode
profile:
profilename = custom profile
name
imagetype = Hextile
(default), JPEG
imagequality = integer
between 20 and 100
fgfrequency = integer
between 1 and 10
/jointfilesconvert/326691/bgfrequency = integer
between 1 and 10
capturefrequency = integer
between 1 and 10
bandwidthlimit = -1
(unlimited) or integer between 5
and 200 (KB/sec)
The imagequality value is always an
integer between 20 and 100. When
imagetype = Hextile, it controls color
depth reduction, with 24bpp = 100%,
21bpp = 88%, 18bpp = 75%, 15bpp =
63%, 12bpp = 50%, 9bpp =38%, 6bpp
= 25%. When imagetype = JPEG, it
controls the JPEG compression level.
Comments to this Manuals