Vector V08 User Manual download pdf (Page 22)

INSTALLATION DIRECTIVE MAY 2006

V08 ENT M75

M11

M12

Battery recharging

This is accomplished through the power supply line of

the electric starter motor and connection to the +B of

the alternator. The electronic regulator of the alternator

that equips the engine allows an effective control over the

battery recharging operation.

If, due to installation requirements, the batteries need to be

positioned at a distance from the engine, we recommend

increasing the cross section of the power line conductors

and verifying recharging effectiveness by measuring voltage

across the battery poles.

For the best control of the battery recharge cabling the line

relating to the S terminal of the alternator directly to the

positive pole terminal of the battery (see figure 17).

Figure 17

Figure 16

Connect to positive

pole terminal of the

starter motor

B+

05_073_V

B−

Connect to negative pole terminal

of the starter motor

Connect to positive

pole terminal of the

battery

Connect to positive

pole terminal of the

starter motor

B+

05_075_V

B−

Connect to negative pole terminal

of the starter motor

IGS+B

05_074_V

Connect to positive pole

terminal of the battery

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Vector V08 User Manual Page 22