Vector PC-Duo Installation Guide download pdf (Page 90)

PC-Duo Gateway Server Guide

 Select Single Computer (at one IPv4 address) and enter an IP address in the Address

field.

 Select Group of computers (by IPv4 subnet mask) and enter the appropriate values into

Address and Mask.

 Select Group of computers (by IPv4 start address & count), enter the first address in a

range in the Address field, and enter the number of addresses in the range in the Number

of addresses field.

 Select Single Computer (at one IPv6 address) and enter an IP address in the Address

field.

 Select Group of computers (by IPv6 subnet mask) and enter the appropriate values into

Address and Mask.

Add a list of commonly used address ranges by clicking on Add Common Ranges. An

additional set of address ranges will appear in the Network tab window.

Edit any address range by selecting it in the list and clicking Edit Range.

Delete any address range by selecting one or more ranges in the list and clicking Remove

Range.

Grouping tab

One or more rules can be configured to automatically assign Hosts reporting to the

Gateway to one or more custom Gateway Groups. The rules can be configured using

Active Directory, network address (IPv4 only), or the Extension tag in the Host.

In addition, there are a few generic rules that can be used, if no custom rules are

specified.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 160 161

No comments

Vector PC-Duo Installation Guide Page 90